music, guitars & other obsessions

Adding Effect Bus/Channel

One of the neat thing that one can do with the Mackie 1640i, is using the Aux Send via Firewire to create a effects loop – just like with an analogue console (which it is), the only difference is no actual wiring is involved.

There are just a few steps required to do this:

  1. Press down the “Sends 1-6 to FW 9-14” button above the Aux SENDS pots.
  2. Create a channel in the DAW (I’m using Reaper), set its Input to any of the FW channels (9-14), depending on which AUX SEND you are using.
  3. Add the effect or effects that you want to the newly created channel, e.g., reverb, compressor, etc. Arm the channel for recoding, and set the Record Monitoring to On to hear or record the effect. I just set the output to the Main Mix, but you can always add it to a sub-group if desired.
  4. That’s it, just like with an analogue console, now you can control the level, EQ of the Fx by playing with the channel fader and/or the Aux Send levels.
  5. For those of you that want to get fancy, you can also automate the Fx by using the functions inside the DAW, but I’m happy just to twiddle with the knobs…
Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s